Skip to main content
DIYCar Search

Search

OBD-II Code Lookup: Generic P0 Codes

Posted by Posted

An OBD-II trouble code is a short code your vehicle's computer stores when it detects a problem, and it is what turns the check engine light on. Type a code such as P0420, or a few words such as "oxygen sensor", to see what a generic P0 powertrain code means in plain English, which system it points to, general causes and how urgent it is. The table covers 295 generic P0 codes. A code names a symptom the computer found, not a part that has failed, so it is a starting point for diagnosis and not a diagnosis. Consult your owner's manual.

Look up a code

Enter a code such as P0420, or a few words such as "oxygen sensor bank 2" or "misfire". Results update as you type and nothing leaves your browser.

Code or keywords

Generic P0 codes only. Try P0301, P0171, or words like catalyst.

Code meaning

Not sure how to get the code from your car? See how to read check engine light codes at home.

How the code lookup works

The tool is a lookup, not a calculation. It matches what you type against a table of 295 generic P0 codes. Each row has a plain-English meaning, the system affected, general causes and an urgency class. For anything outside the table it says so instead of guessing: manufacturer-specific codes (P1xxx and many P2 and P3 codes), body, chassis and network codes (B, C, U), and generic codes that are not in the table.

How to read a code

  • First character: P powertrain, B body, C chassis, U network.
  • Second character: 0 means a generic code shared by makes. Other values can be manufacturer-specific, so their meaning depends on the vehicle.
  • Last three characters: the system and the specific fault. For P0 codes, the third character groups them: P01xx fuel and air metering, P02xx injectors, P03xx ignition and misfire, P04xx auxiliary emissions controls, P05xx vehicle speed, idle control and related inputs, P06xx the computer and its outputs, P07xx and P08xx transmission.

The three urgency classes

The classes are the editorial team's general guidance for planning, not part of the source list. They never replace your owner's manual or a technician's diagnosis.

  • Stop and get service now: overheating or similar conditions that can damage the vehicle or leave you stranded quickly.
  • Service soon: a fault that should be diagnosed in the next days. Some, such as misfire codes, become "stop" if the check engine light flashes.
  • Monitor: usually not urgent for the engine (for example a small vapor-system leak), but still worth checking, since the light stays on.

Common causes are general possibilities written by the editorial team. They are not from the source list, they are not a diagnosis and they are not in order of likelihood.

All 295 generic P0 codes in the table

This full list works without JavaScript. Codes are in numerical order.

Generic P0 codes covered by this tool (295)
CodePlain meaningSystemUrgency class
P0100 The computer sees a general electrical fault in the mass or volume airflow sensor circuit.Air and fuel meteringService soon
P0101 The mass or volume airflow sensor signal is in range but does not match what the computer expects.Air and fuel meteringService soon
P0102 The mass or volume airflow sensor circuit signal is lower than expected.Air and fuel meteringService soon
P0103 The mass or volume airflow sensor circuit signal is higher than expected.Air and fuel meteringService soon
P0104 The mass or volume airflow sensor signal drops out or is erratic from time to time.Air and fuel meteringService soon
P0105 The computer sees a general electrical fault in the manifold absolute pressure / barometric pressure sensor circuit.Air and fuel meteringService soon
P0106 The manifold absolute pressure / barometric pressure sensor signal is in range but does not match what the computer expects.Air and fuel meteringService soon
P0107 The manifold absolute pressure / barometric pressure sensor circuit signal is lower than expected.Air and fuel meteringService soon
P0108 The manifold absolute pressure / barometric pressure sensor circuit signal is higher than expected.Air and fuel meteringService soon
P0111 The intake air temperature sensor signal is in range but does not match what the computer expects.Air and fuel meteringService soon
P0112 The intake air temperature sensor circuit signal is lower than expected.Air and fuel meteringService soon
P0113 The intake air temperature sensor circuit signal is higher than expected.Air and fuel meteringService soon
P0114 The intake air temperature sensor signal drops out or is erratic from time to time.Air and fuel meteringService soon
P0115 The computer sees a general electrical fault in the engine coolant temperature sensor circuit.Air and fuel meteringService soon
P0116 The engine coolant temperature sensor signal is in range but does not match what the computer expects.Air and fuel meteringService soon
P0117 The engine coolant temperature sensor circuit signal is lower than expected.Air and fuel meteringService soon
P0118 The engine coolant temperature sensor circuit signal is higher than expected.Air and fuel meteringService soon
P0119 The engine coolant temperature sensor signal drops out or is erratic from time to time.Air and fuel meteringService soon
P0120 The computer sees a general electrical fault in the throttle or pedal position sensor A circuit.Air and fuel meteringService soon
P0121 The throttle or pedal position sensor A signal is in range but does not match what the computer expects.Air and fuel meteringService soon
P0122 The throttle or pedal position sensor A circuit signal is lower than expected.Air and fuel meteringService soon
P0123 The throttle or pedal position sensor A circuit signal is higher than expected.Air and fuel meteringService soon
P0124 The throttle or pedal position sensor A signal drops out or is erratic from time to time.Air and fuel meteringService soon
P0125 The engine is not reaching the coolant temperature the computer needs before it switches to normal fuel control.Air and fuel meteringService soon
P0126 The engine coolant is not warming up enough for stable operation.Air and fuel meteringService soon
P0130 The computer sees a general fault in the oxygen sensor (Bank 1, sensor 1) circuit.Emissions controlService soon
P0131 The oxygen sensor (Bank 1, sensor 1) signal voltage is lower than expected.Emissions controlService soon
P0132 The oxygen sensor (Bank 1, sensor 1) signal voltage is higher than expected.Emissions controlService soon
P0133 The oxygen sensor (Bank 1, sensor 1) reacts more slowly than the computer expects.Emissions controlService soon
P0134 The computer sees no signal change from the oxygen sensor (Bank 1, sensor 1).Emissions controlService soon
P0135 The heater circuit of the oxygen sensor (Bank 1, sensor 1) has a fault.Emissions controlService soon
P0136 The computer sees a general fault in the oxygen sensor (Bank 1, sensor 2) circuit.Emissions controlService soon
P0137 The oxygen sensor (Bank 1, sensor 2) signal voltage is lower than expected.Emissions controlService soon
P0138 The oxygen sensor (Bank 1, sensor 2) signal voltage is higher than expected.Emissions controlService soon
P0139 The oxygen sensor (Bank 1, sensor 2) reacts more slowly than the computer expects.Emissions controlService soon
P0140 The computer sees no signal change from the oxygen sensor (Bank 1, sensor 2).Emissions controlService soon
P0141 The heater circuit of the oxygen sensor (Bank 1, sensor 2) has a fault.Emissions controlService soon
P0142 The computer sees a general fault in the oxygen sensor (Bank 1, sensor 3) circuit.Emissions controlService soon
P0143 The oxygen sensor (Bank 1, sensor 3) signal voltage is lower than expected.Emissions controlService soon
P0144 The oxygen sensor (Bank 1, sensor 3) signal voltage is higher than expected.Emissions controlService soon
P0145 The oxygen sensor (Bank 1, sensor 3) reacts more slowly than the computer expects.Emissions controlService soon
P0146 The computer sees no signal change from the oxygen sensor (Bank 1, sensor 3).Emissions controlService soon
P0147 The heater circuit of the oxygen sensor (Bank 1, sensor 3) has a fault.Emissions controlService soon
P0150 The computer sees a general fault in the oxygen sensor (Bank 2, sensor 1) circuit.Emissions controlService soon
P0151 The oxygen sensor (Bank 2, sensor 1) signal voltage is lower than expected.Emissions controlService soon
P0152 The oxygen sensor (Bank 2, sensor 1) signal voltage is higher than expected.Emissions controlService soon
P0153 The oxygen sensor (Bank 2, sensor 1) reacts more slowly than the computer expects.Emissions controlService soon
P0154 The computer sees no signal change from the oxygen sensor (Bank 2, sensor 1).Emissions controlService soon
P0155 The heater circuit of the oxygen sensor (Bank 2, sensor 1) has a fault.Emissions controlService soon
P0156 The computer sees a general fault in the oxygen sensor (Bank 2, sensor 2) circuit.Emissions controlService soon
P0157 The oxygen sensor (Bank 2, sensor 2) signal voltage is lower than expected.Emissions controlService soon
P0158 The oxygen sensor (Bank 2, sensor 2) signal voltage is higher than expected.Emissions controlService soon
P0159 The oxygen sensor (Bank 2, sensor 2) reacts more slowly than the computer expects.Emissions controlService soon
P0160 The computer sees no signal change from the oxygen sensor (Bank 2, sensor 2).Emissions controlService soon
P0161 The heater circuit of the oxygen sensor (Bank 2, sensor 2) has a fault.Emissions controlService soon
P0162 The computer sees a general fault in the oxygen sensor (Bank 2, sensor 3) circuit.Emissions controlService soon
P0163 The oxygen sensor (Bank 2, sensor 3) signal voltage is lower than expected.Emissions controlService soon
P0164 The oxygen sensor (Bank 2, sensor 3) signal voltage is higher than expected.Emissions controlService soon
P0165 The oxygen sensor (Bank 2, sensor 3) reacts more slowly than the computer expects.Emissions controlService soon
P0166 The computer sees no signal change from the oxygen sensor (Bank 2, sensor 3).Emissions controlService soon
P0167 The heater circuit of the oxygen sensor (Bank 2, sensor 3) has a fault.Emissions controlService soon
P0170 The fuel-mixture correction on bank 1 is outside the range the computer can handle.Air and fuel meteringService soon
P0171 Bank 1 is getting too much air or too little fuel for the mixture the computer wants.Air and fuel meteringService soon
P0172 Bank 1 is getting too much fuel or too little air for the mixture the computer wants.Air and fuel meteringService soon
P0173 The fuel-mixture correction on bank 2 is outside the range the computer can handle.Air and fuel meteringService soon
P0174 Bank 2 is getting too much air or too little fuel for the mixture the computer wants.Air and fuel meteringService soon
P0175 Bank 2 is getting too much fuel or too little air for the mixture the computer wants.Air and fuel meteringService soon
P0176 The computer sees a general electrical fault in the fuel composition sensor circuit.Air and fuel meteringService soon
P0177 The fuel composition sensor signal is in range but does not match what the computer expects.Air and fuel meteringService soon
P0178 The fuel composition sensor circuit signal is lower than expected.Air and fuel meteringService soon
P0179 The fuel composition sensor circuit signal is higher than expected.Air and fuel meteringService soon
P0190 The computer sees a general electrical fault in the fuel rail pressure sensor circuit.Air and fuel meteringService soon
P0191 The fuel rail pressure sensor signal is in range but does not match what the computer expects.Air and fuel meteringService soon
P0192 The fuel rail pressure sensor circuit signal is lower than expected.Air and fuel meteringService soon
P0193 The fuel rail pressure sensor circuit signal is higher than expected.Air and fuel meteringService soon
P0194 The fuel rail pressure sensor signal drops out or is erratic from time to time.Air and fuel meteringService soon
P0200 The computer sees a fault in the fuel injector circuit.Fuel injectionService soon
P0201 The computer sees a fault in the fuel injector circuit for cylinder 1.Fuel injectionService soon
P0202 The computer sees a fault in the fuel injector circuit for cylinder 2.Fuel injectionService soon
P0203 The computer sees a fault in the fuel injector circuit for cylinder 3.Fuel injectionService soon
P0204 The computer sees a fault in the fuel injector circuit for cylinder 4.Fuel injectionService soon
P0205 The computer sees a fault in the fuel injector circuit for cylinder 5.Fuel injectionService soon
P0206 The computer sees a fault in the fuel injector circuit for cylinder 6.Fuel injectionService soon
P0207 The computer sees a fault in the fuel injector circuit for cylinder 7.Fuel injectionService soon
P0208 The computer sees a fault in the fuel injector circuit for cylinder 8.Fuel injectionService soon
P0217 The engine temperature has been reported as too high.CoolingStop and get service now
P0218 The transmission temperature has been reported as too high.TransmissionStop and get service now
P0219 The engine has been run faster than its allowed speed.Idle and vehicle speedService soon
P0220 The computer sees a general electrical fault in the throttle or pedal position sensor B circuit.Air and fuel meteringService soon
P0221 The throttle or pedal position sensor B signal is in range but does not match what the computer expects.Air and fuel meteringService soon
P0222 The throttle or pedal position sensor B circuit signal is lower than expected.Air and fuel meteringService soon
P0223 The throttle or pedal position sensor B circuit signal is higher than expected.Air and fuel meteringService soon
P0224 The throttle or pedal position sensor B signal drops out or is erratic from time to time.Air and fuel meteringService soon
P0230 The computer sees a fault in the fuel pump control circuit.Fuel injectionService soon
P0234 A turbocharged engine has produced more boost than the computer allows.Air and fuel meteringService soon
P0235 The computer sees a general electrical fault in the turbocharger boost sensor A circuit.Air and fuel meteringService soon
P0236 The turbocharger boost sensor A signal is in range but does not match what the computer expects.Air and fuel meteringService soon
P0237 The turbocharger boost sensor A circuit signal is lower than expected.Air and fuel meteringService soon
P0238 The turbocharger boost sensor A circuit signal is higher than expected.Air and fuel meteringService soon
P0261 The cylinder 1 injector circuit signal is lower than expected.Fuel injectionService soon
P0262 The cylinder 1 injector circuit signal is higher than expected.Fuel injectionService soon
P0264 The cylinder 2 injector circuit signal is lower than expected.Fuel injectionService soon
P0265 The cylinder 2 injector circuit signal is higher than expected.Fuel injectionService soon
P0267 The cylinder 3 injector circuit signal is lower than expected.Fuel injectionService soon
P0268 The cylinder 3 injector circuit signal is higher than expected.Fuel injectionService soon
P0270 The cylinder 4 injector circuit signal is lower than expected.Fuel injectionService soon
P0271 The cylinder 4 injector circuit signal is higher than expected.Fuel injectionService soon
P0273 The cylinder 5 injector circuit signal is lower than expected.Fuel injectionService soon
P0274 The cylinder 5 injector circuit signal is higher than expected.Fuel injectionService soon
P0276 The cylinder 6 injector circuit signal is lower than expected.Fuel injectionService soon
P0277 The cylinder 6 injector circuit signal is higher than expected.Fuel injectionService soon
P0279 The cylinder 7 injector circuit signal is lower than expected.Fuel injectionService soon
P0280 The cylinder 7 injector circuit signal is higher than expected.Fuel injectionService soon
P0282 The cylinder 8 injector circuit signal is lower than expected.Fuel injectionService soon
P0283 The cylinder 8 injector circuit signal is higher than expected.Fuel injectionService soon
P0300 The engine is misfiring, and the misses are random or in more than one cylinder.Ignition and misfireService soon
P0301 Cylinder 1 is misfiring.Ignition and misfireService soon
P0302 Cylinder 2 is misfiring.Ignition and misfireService soon
P0303 Cylinder 3 is misfiring.Ignition and misfireService soon
P0304 Cylinder 4 is misfiring.Ignition and misfireService soon
P0305 Cylinder 5 is misfiring.Ignition and misfireService soon
P0306 Cylinder 6 is misfiring.Ignition and misfireService soon
P0307 Cylinder 7 is misfiring.Ignition and misfireService soon
P0308 Cylinder 8 is misfiring.Ignition and misfireService soon
P0320 The computer sees a general electrical fault in the ignition or distributor engine-speed input circuit.Ignition and misfireService soon
P0321 The ignition or distributor engine-speed input signal is in range but does not match what the computer expects.Ignition and misfireService soon
P0325 The computer sees a general electrical fault in the knock sensor 1 (bank 1 or single sensor) circuit.Ignition and misfireService soon
P0326 The knock sensor 1 (bank 1 or single sensor) signal is in range but does not match what the computer expects.Ignition and misfireService soon
P0327 The knock sensor 1 (bank 1 or single sensor) circuit signal is lower than expected.Ignition and misfireService soon
P0328 The knock sensor 1 (bank 1 or single sensor) circuit signal is higher than expected.Ignition and misfireService soon
P0329 The knock sensor 1 (bank 1 or single sensor) signal drops out or is erratic from time to time.Ignition and misfireService soon
P0330 The computer sees a general electrical fault in the knock sensor 2 (bank 2) circuit.Ignition and misfireService soon
P0331 The knock sensor 2 (bank 2) signal is in range but does not match what the computer expects.Ignition and misfireService soon
P0332 The knock sensor 2 (bank 2) circuit signal is lower than expected.Ignition and misfireService soon
P0333 The knock sensor 2 (bank 2) circuit signal is higher than expected.Ignition and misfireService soon
P0334 The knock sensor 2 (bank 2) signal drops out or is erratic from time to time.Ignition and misfireService soon
P0335 The computer sees a general electrical fault in the crankshaft position sensor A circuit.Ignition and misfireService soon
P0336 The crankshaft position sensor A signal is in range but does not match what the computer expects.Ignition and misfireService soon
P0337 The crankshaft position sensor A circuit signal is lower than expected.Ignition and misfireService soon
P0338 The crankshaft position sensor A circuit signal is higher than expected.Ignition and misfireService soon
P0339 The crankshaft position sensor A signal drops out or is erratic from time to time.Ignition and misfireService soon
P0340 The computer sees a general electrical fault in the camshaft position sensor circuit.Ignition and misfireService soon
P0341 The camshaft position sensor signal is in range but does not match what the computer expects.Ignition and misfireService soon
P0342 The camshaft position sensor circuit signal is lower than expected.Ignition and misfireService soon
P0343 The camshaft position sensor circuit signal is higher than expected.Ignition and misfireService soon
P0344 The camshaft position sensor signal drops out or is erratic from time to time.Ignition and misfireService soon
P0350 The computer sees a fault in an ignition coil circuit.Ignition and misfireService soon
P0351 The computer sees a fault in the circuit of ignition coil A.Ignition and misfireService soon
P0352 The computer sees a fault in the circuit of ignition coil B.Ignition and misfireService soon
P0353 The computer sees a fault in the circuit of ignition coil C.Ignition and misfireService soon
P0354 The computer sees a fault in the circuit of ignition coil D.Ignition and misfireService soon
P0355 The computer sees a fault in the circuit of ignition coil E.Ignition and misfireService soon
P0356 The computer sees a fault in the circuit of ignition coil F.Ignition and misfireService soon
P0357 The computer sees a fault in the circuit of ignition coil G.Ignition and misfireService soon
P0358 The computer sees a fault in the circuit of ignition coil H.Ignition and misfireService soon
P0385 The computer sees a general electrical fault in the crankshaft position sensor B circuit.Ignition and misfireService soon
P0386 The crankshaft position sensor B signal is in range but does not match what the computer expects.Ignition and misfireService soon
P0387 The crankshaft position sensor B circuit signal is lower than expected.Ignition and misfireService soon
P0388 The crankshaft position sensor B circuit signal is higher than expected.Ignition and misfireService soon
P0389 The crankshaft position sensor B signal drops out or is erratic from time to time.Ignition and misfireService soon
P0400 The exhaust gas recirculation (EGR) system is not flowing as the computer expects.Emissions controlService soon
P0401 Less exhaust gas is being recirculated than the computer expects.Emissions controlService soon
P0402 More exhaust gas is being recirculated than the computer expects.Emissions controlService soon
P0403 The computer sees a fault in the EGR control circuit.Emissions controlService soon
P0404 The EGR circuit works but does not perform as the computer expects.Emissions controlService soon
P0405 The EGR sensor A signal is lower than expected.Emissions controlService soon
P0406 The EGR sensor A signal is higher than expected.Emissions controlService soon
P0410 The secondary air injection system has a fault.Emissions controlService soon
P0411 The secondary air injection system is not moving the amount of air the computer expects.Emissions controlService soon
P0420 The catalytic converter on bank 1 is not cleaning the exhaust as well as the computer expects.Emissions controlService soon
P0421 The warm-up catalytic converter on bank 1 is not cleaning the exhaust as well as expected.Emissions controlService soon
P0422 The main catalytic converter on bank 1 is not cleaning the exhaust as well as expected.Emissions controlService soon
P0423 The heated catalytic converter on bank 1 is not cleaning the exhaust as well as expected.Emissions controlService soon
P0424 The heated catalytic converter on bank 1 is not reaching the temperature the computer expects.Emissions controlService soon
P0430 The catalytic converter on bank 2 is not cleaning the exhaust as well as the computer expects.Emissions controlService soon
P0431 The warm-up catalytic converter on bank 2 is not cleaning the exhaust as well as expected.Emissions controlService soon
P0432 The main catalytic converter on bank 2 is not cleaning the exhaust as well as expected.Emissions controlService soon
P0433 The heated catalytic converter on bank 2 is not cleaning the exhaust as well as expected.Emissions controlService soon
P0434 The heated catalytic converter on bank 2 is not reaching the temperature the computer expects.Emissions controlService soon
P0440 The fuel vapor (evaporative) control system has a fault.Evaporative emissionsMonitor
P0441 The fuel vapor system is not purging vapor at the rate the computer expects.Evaporative emissionsMonitor
P0442 The fuel vapor system has a small leak.Evaporative emissionsMonitor
P0445 The purge control valve circuit is shorted.Evaporative emissionsMonitor
P0446 The computer sees a fault in the vapor system vent control circuit.Evaporative emissionsMonitor
P0447 The vapor system vent control circuit is open (no connection).Evaporative emissionsMonitor
P0448 The vapor system vent control circuit is shorted.Evaporative emissionsMonitor
P0449 The computer sees a fault in the vapor system vent valve or solenoid circuit.Evaporative emissionsMonitor
P0450 The computer sees a general electrical fault in the evaporative system pressure sensor circuit.Evaporative emissionsMonitor
P0451 The evaporative system pressure sensor signal is in range but does not match what the computer expects.Evaporative emissionsMonitor
P0452 The evaporative system pressure sensor circuit signal is lower than expected.Evaporative emissionsMonitor
P0453 The evaporative system pressure sensor circuit signal is higher than expected.Evaporative emissionsMonitor
P0454 The evaporative system pressure sensor signal drops out or is erratic from time to time.Evaporative emissionsMonitor
P0455 The fuel vapor system has a large leak.Evaporative emissionsMonitor
P0460 The computer sees a general electrical fault in the fuel level sensor circuit.Computer and electricalMonitor
P0461 The fuel level sensor signal is in range but does not match what the computer expects.Computer and electricalMonitor
P0462 The fuel level sensor circuit signal is lower than expected.Computer and electricalMonitor
P0463 The fuel level sensor circuit signal is higher than expected.Computer and electricalMonitor
P0464 The fuel level sensor signal drops out or is erratic from time to time.Computer and electricalMonitor
P0480 The computer sees a fault in the control circuit of cooling fan 1.CoolingService soon
P0481 The computer sees a fault in the control circuit of cooling fan 2.CoolingService soon
P0500 The computer sees a fault in the vehicle speed sensor signal.Idle and vehicle speedService soon
P0501 The vehicle speed signal does not match what the computer expects.Idle and vehicle speedService soon
P0502 The vehicle speed sensor signal is lower than expected.Idle and vehicle speedService soon
P0505 The idle speed control system has a fault.Idle and vehicle speedService soon
P0506 The idle speed is lower than the computer expects.Idle and vehicle speedService soon
P0507 The idle speed is higher than the computer expects.Idle and vehicle speedService soon
P0510 The closed-throttle switch signal is faulty.Idle and vehicle speedService soon
P0520 The computer sees a fault in the engine oil pressure sensor or switch circuit.LubricationService soon
P0521 The oil pressure sensor reading does not match what the computer expects.LubricationService soon
P0522 The oil pressure sensor signal voltage is lower than expected.LubricationService soon
P0523 The oil pressure sensor signal voltage is higher than expected.LubricationService soon
P0530 The computer sees a general electrical fault in the A/C refrigerant pressure sensor circuit.Air conditioningMonitor
P0531 The A/C refrigerant pressure sensor signal is in range but does not match what the computer expects.Air conditioningMonitor
P0532 The A/C refrigerant pressure sensor circuit signal is lower than expected.Air conditioningMonitor
P0533 The A/C refrigerant pressure sensor circuit signal is higher than expected.Air conditioningMonitor
P0534 The A/C system may have lost refrigerant.Air conditioningMonitor
P0550 The computer sees a general electrical fault in the power steering pressure sensor circuit.SteeringService soon
P0551 The power steering pressure sensor signal is in range but does not match what the computer expects.SteeringService soon
P0552 The power steering pressure sensor circuit signal is lower than expected.SteeringService soon
P0553 The power steering pressure sensor circuit signal is higher than expected.SteeringService soon
P0554 The power steering pressure sensor signal drops out or is erratic from time to time.SteeringService soon
P0560 The vehicle electrical system voltage is not what the computer expects.Computer and electricalService soon
P0561 The vehicle electrical system voltage is unstable.Computer and electricalService soon
P0562 The vehicle electrical system voltage is low.Computer and electricalService soon
P0563 The vehicle electrical system voltage is high.Computer and electricalService soon
P0565 The computer sees a fault in the cruise control "on" signal.Cruise controlMonitor
P0566 The computer sees a fault in the cruise control "off" signal.Cruise controlMonitor
P0567 The computer sees a fault in the cruise control "resume" signal.Cruise controlMonitor
P0568 The computer sees a fault in the cruise control "set" signal.Cruise controlMonitor
P0569 The computer sees a fault in the cruise control "coast" signal.Cruise controlMonitor
P0570 The computer sees a fault in the cruise control "accelerate" signal.Cruise controlMonitor
P0571 The brake switch circuit used by cruise control has a fault.Cruise controlService soon
P0572 The brake switch circuit signal is lower than expected.Cruise controlService soon
P0573 The brake switch circuit signal is higher than expected.Cruise controlService soon
P0600 Control modules in the vehicle are having trouble communicating.Computer and electricalService soon
P0601 The engine computer found a memory error inside itself.Computer and electricalService soon
P0602 The control module has a programming error.Computer and electricalService soon
P0603 The engine computer found an error in its keep-alive memory.Computer and electricalService soon
P0604 The engine computer found an error in its working memory.Computer and electricalService soon
P0605 The engine computer found an error in its stored program memory.Computer and electricalService soon
P0606 The powertrain control module found a processor fault.Computer and electricalService soon
P0620 The computer sees a fault in the alternator (generator) control circuit.Computer and electricalService soon
P0650 The computer sees a fault in the check engine light control circuit.Computer and electricalService soon
P0700 The transmission control module has stored its own fault codes.TransmissionService soon
P0701 The transmission control system is not performing as expected.TransmissionService soon
P0702 The computer sees an electrical fault in the transmission control system.TransmissionService soon
P0705 The gear selector (range) sensor circuit has a fault.TransmissionService soon
P0706 The gear selector sensor signal does not match what the computer expects.TransmissionService soon
P0710 The computer sees a general electrical fault in the transmission fluid temperature sensor circuit.TransmissionService soon
P0711 The transmission fluid temperature sensor signal is in range but does not match what the computer expects.TransmissionService soon
P0712 The transmission fluid temperature sensor circuit signal is lower than expected.TransmissionService soon
P0713 The transmission fluid temperature sensor circuit signal is higher than expected.TransmissionService soon
P0714 The transmission fluid temperature sensor signal drops out or is erratic from time to time.TransmissionService soon
P0715 The computer sees a fault in the transmission input speed sensor circuit.TransmissionService soon
P0716 The transmission input speed signal does not match what the computer expects.TransmissionService soon
P0717 The computer sees no signal from the transmission input speed sensor.TransmissionService soon
P0718 The transmission input speed signal drops out from time to time.TransmissionService soon
P0720 The computer sees a fault in the transmission output speed sensor circuit.TransmissionService soon
P0721 The transmission output speed signal does not match what the computer expects.TransmissionService soon
P0722 The computer sees no signal from the transmission output speed sensor.TransmissionService soon
P0723 The transmission output speed signal drops out from time to time.TransmissionService soon
P0730 The computer sees a gear ratio that does not match the selected gear.TransmissionService soon
P0731 The computer sees a gear ratio that does not match gear 1.TransmissionService soon
P0732 The computer sees a gear ratio that does not match gear 2.TransmissionService soon
P0733 The computer sees a gear ratio that does not match gear 3.TransmissionService soon
P0734 The computer sees a gear ratio that does not match gear 4.TransmissionService soon
P0735 The computer sees a gear ratio that does not match gear 5.TransmissionService soon
P0736 The computer sees a gear ratio that does not match reverse.TransmissionService soon
P0740 The torque converter clutch circuit has a fault.TransmissionService soon
P0741 The torque converter clutch is not locking up when it should.TransmissionService soon
P0743 The torque converter clutch circuit has an electrical fault.TransmissionService soon
P0744 The torque converter clutch circuit drops out from time to time.TransmissionService soon
P0745 The pressure control solenoid has a general fault.TransmissionService soon
P0746 The pressure control solenoid is not working as expected or is stuck off.TransmissionService soon
P0747 The pressure control solenoid is stuck on.TransmissionService soon
P0748 The pressure control solenoid has an electrical fault.TransmissionService soon
P0749 The pressure control solenoid drops out from time to time.TransmissionService soon
P0750 The shift solenoid A has a general fault.TransmissionService soon
P0751 The shift solenoid A is not working as expected or is stuck off.TransmissionService soon
P0752 The shift solenoid A is stuck on.TransmissionService soon
P0753 The shift solenoid A has an electrical fault.TransmissionService soon
P0754 The shift solenoid A drops out from time to time.TransmissionService soon
P0755 Shift solenoid B has a general fault.TransmissionService soon
P0757 Shift solenoid B is stuck on.TransmissionService soon
P0758 Shift solenoid B has an electrical fault.TransmissionService soon
P0759 Shift solenoid B drops out from time to time.TransmissionService soon
P0760 The shift solenoid C has a general fault.TransmissionService soon
P0762 The shift solenoid C is stuck on.TransmissionService soon
P0763 The shift solenoid C has an electrical fault.TransmissionService soon
P0764 The shift solenoid C drops out from time to time.TransmissionService soon
P0780 The transmission is not shifting as the computer expects.TransmissionService soon
P0781 The transmission is not making the 1-2 shift as the computer expects.TransmissionService soon
P0782 The transmission is not making the 2-3 shift as the computer expects.TransmissionService soon
P0783 The transmission is not making the 3-4 shift as the computer expects.TransmissionService soon
P0784 The transmission is not making the 4-5 shift as the computer expects.TransmissionService soon

Meanings rewritten from the descriptions in the Delaware DMV list of generic diagnostic trouble codes (source 1, opened 2026-11-17). Urgency classes are editorial. Codes with garbled or mis-numbered lines in the source list are left out.

Assumptions and limits

  • Coverage is 295 generic P0 codes for gasoline passenger vehicles. Diesel-specific and manufacturer-specific codes are not included.
  • A code can be set by a wiring or connector problem, a failed sensor, or by the condition the sensor correctly reports. Diagnosis needs tests on the vehicle.
  • The tool does not say whether a vehicle will pass an emissions inspection, whether a part must be replaced or what a repair costs.
  • Check your owner's manual. If it or a technician disagrees with this table, follow them.

Next: what to do first when the light comes on and what a flashing light means.

Quick answers

What does an OBD-II code mean?

It is a short code your vehicle's computer stores when a monitored sensor, circuit or system reports something outside what the computer expects. The code identifies the area, such as a misfire in cylinder 2 or low efficiency in the bank 1 catalyst, but it does not identify which part is faulty.

What does P0420 mean?

Catalyst System Efficiency Below Threshold (Bank 1): the computer judges that the catalytic converter on bank 1 is not cleaning the exhaust as well as it expects. That does not prove the converter itself is bad. Oxygen sensors, exhaust leaks and engine problems such as misfires can all lead to the same code, so a shop usually checks them first.

Can I keep driving with the check engine light on?

It depends on the code and how the car behaves. A steady light with normal driving usually means service soon. A flashing light, an overheating warning, an oil pressure warning, a strong fuel smell, or a loss of power or braking means stop driving safely and get help. When in doubt, have the vehicle checked.

Does clearing the code fix the problem?

No. Clearing it only erases the stored code and turns the light off. If the cause is still there the light usually comes back, and clearing it removes information a technician may want. Fix or have the cause diagnosed first.

Why does the tool not list my P1xxx, B, C or U code?

Codes starting with P1, and many starting with P2 or P3, can be specific to a vehicle maker, and B, C and U codes cover the body, chassis and network. Their meanings depend on the vehicle, so this tool does not guess. Use your owner's manual, the maker's service information or a shop.

Where do the meanings come from?

The code descriptions come from the Delaware Division of Motor Vehicles' public list of generic diagnostic trouble codes (source 1, opened 2026-11-17). We rewrote each meaning in our own words. The causes and urgency classes are the editorial team's general guidance and are labelled as such. Generic code definitions are standardized in SAE J2012, a paid standard we do not reproduce.

How do I read the code from my car?

An OBD-II scan tool plugs into the diagnostic port, usually under the dash on the driver's side, and displays the stored codes. Many parts stores read them for free. See our guide on how to read check engine light codes.

Where we got this

  1. Delaware Division of Motor Vehicles, "On-Board Diagnostic Trouble Codes" (list of generic DTCs) (dmv.de.gov) Opened 2026-11-17. The list is undated; descriptions are rewritten here and typos or mis-numbered lines in it are omitted.
  2. U.S. EPA, "On-Board Diagnostic (OBD) Regulations and Requirements: Questions and Answers" (EPA420-F-03-042, December 2003) (nepis.epa.gov) Opened 2026-11-17. Used only for what OBD and the check engine light (MIL) are.

Further guides